Open Call #2 Winners

 

Check out the five innovative projects that have been selected in our second Open Call as well as the companies behind them.

 

 

The companies

ROVIMATICA is a Spanish SME specialized in Robotics & AI and computer vision systems.. With over 19 years of expertise in computer vision, 7+ years in Deep Learning, and strong experience in Edge AI, ROVIMATICA is a pioneer in AI vision solutions in Spain. The company delivers tailored turnkey solutions and R&D projects spanning quality assurance, robotics, mobility, aerial intelligence, 3D imaging, and specialized imaging technologies. Our solutions empower industries such as mobility, aeronautics, agriculture, automotive, energy, and environmental sectors. ROVIMATICA brings a proven track record of more than R&D projects (20+ Europeans), including leadership in two Horizon WP. 

More information

 

Solar MEMS Technologies, founded in 2009 as a spin-off from the University of Seville, is a technology company specialized in high-precision sensors and advanced electronic systems for space, aeronautics, and defence applications. SMT develops solutions for attitude determination, positioning, navigation, and calibration, combining expertise in electronics, optics, mechanics, and MEMS technologies. The company is a global leader in satellite sun sensors and supports innovation and reliability in aerospace systems through advanced manufacturing and Industry 5.0 technologies.

More information

 

Their project COSMIC-AI

COSMIC-AI proposes an agentic AI-driven inspection system for high-precision defect detection in PCB welding joints used in space electronics. The project focuses on Capability 1.5 of MAGICIAN project, integrating computer vision, adaptive model optimization, and low-latency inference to enable submillimetre detection accuracy under stringent aerospace quality requirements. 

 

 

 

 

 

 

 

 

 

 

 

 

 

The companies

Motonius is focusing on innovative mobility and micro-mobility solutions for diverse domains and applications as well as in the development of dedicated industrial vehicles. In addition, it actively promotes the adoption of smart technologies such as AI in manufacturing and robot/co-bot integration focusing on sustainable and responsible manufacturing. The founders bring over twenty years of experience in vehicle development, autonomous navigation, E/E integration and robotics.

More information

 

KMF was established in 1998, as an international transport company and in 2004, expanded into the light prefabrication sector with the launch of its first production line. The company specializes in the design and manufacturing of prefabricated modular units, which remain its core business activity to this day, holding a leading position within the sector. In 2018 the company headquarters were moved in an 8.000 sqm privately owned production facility which multiplied the production capabilities meeting ISO 9001:2015, ISO 14001:2015 & ISO 45001:2018 certifications.

More information

 

Their project WelDDeR

WelDDeR (Weld Defect Detection Robot) project is coordinated by MOTONIUS, which acts as technology provider together with KMF as an industrial end-user. It targets the modernization of quality inspection and assurance in the prefabricated buildings industry. Currently, the industry relies on manual visual inspection of large-scale metal frames, a process that is often subjective, inconsistent, physically demanding and time-consuming. The core innovation lies in the architectural shift from “bringing the part to the inspection cell” to “bringing the smart inspection cell to the part”. The project will deploy a mobile collaborative robot platform — integrating a Co-Bot with the specialized Polarized Camera System — to a mobile platform in order to perform high-fidelity weld inspections directly on the shop floor at the point of manufacturing. WelDDeR aims to reduce inspection time and defect miss rate, promote Zero-Defect Shipping and allow for inspection data digitalization to improve traceability and standardization.

 

 

 

 

 

 

 

The companies

Metalac Bojler d.o.o. is a manufacturing SME and a subsidiary of the Metalac Group, established in 1959. Based in Gornji Milanovac, Serbia, the company is a leading regional manufacturer of electric water heaters, with a production capacity exceeding 200,000 units per year. Certified to ISO 9001 and ISO 14001, Metalac Bojler is actively pursuing Industry 4.0 digitalisation. It has successfully introduced Fanuc robotic welding cells and runs continuous upskilling programmes to support its workforce through automation transitions.

More information

 

DunavNET is a technology-focused innovation company established in 2006, specialising in the design, development and commercial deployment of IoT, AI and data-driven solutions. Headquartered in Ireland, with its R&D centre in Novi Sad, Serbia, DunavNET develops platforms for smart manufacturing, agriculture and environmental monitoring, including factoryNET for predictive and data-driven factory operations. The company has participated in more than 15 EU-funded projects under Horizon Europe (COMMECT, ENACT, Farmtron XR), Horizon 2020 (Kyklos 4.0, EFPF), EuroHPC and Digital Europe (SENSE), with a strong focus on human-in-the-loop AI systems for industry.

More information

 

Their project PRISM

The Polarimetric Robotic Inspection System for Manufacturing (PRISM) addresses functionalities F1.2 “Polarized camera system” and F1.5 “Innovative approaches and architectures for improved defect detection and classification”. Deployed at Metalac Bojler’s water heater production line, PRISM acts as a pre-weld quality gate. It detects 1–2 mm misalignments of water pipes before the robotic welder starts, because such misalignments can lead to joint failures during the product’s ten-year warranty. Shape-from-Polarization reconstructs the 3D geometry of the joint on both highly reflective stainless steel and low-contrast carbon steel. An AI model trained on synthetic data then computes a “robot-ready” 3D offset vector. Operators receive a 3D alignment heatmap and a clear recommendation via the factoryNET interface, while keeping full decision authority.

 

 

 

 

 

 

 

 

The company

Equinox Advisory Ltd. is a Malta-based technology and advisory SME, founded in 2008. Through its specialised algorithmic BrAIn division, it works where artificial intelligence, systems integration and industrial digitalisation meet. Its multidisciplinary team of data scientists, software engineers, robotics specialists and project managers designs and deploys cybernetic and physical AI systems for industry, from data pipelines and machine-vision models to robotic cells integrated with the plant’s MES. Equinox pairs this engineering depth with long experience of delivering EU-funded innovation programmes under Horizon 2020 and Horizon Europe, and with a working command of the regulatory frameworks that govern trustworthy AI.

More information

 

Their project WIZARD

WIZARD (Workspace Inspection and Zero-defect Automation for Robotic Deployment) brings inline, AI-driven inspection to thermoformed plastic intermediate components, where transparent and reflective surfaces traditionally defeat 2D vision and leave any defects to be caught by human eye. Adapting MAGICIAN capabilities C1.1 and C2.2, it combines high-resolution vision, 3D laser triangulation and infrared thermography on the Sensing Robot, a Doosan H2515 arm. Its multimodal AI model is designed to detect, classify, grade and localise sink marks, flash, warpage, subsurface voids and other defects, report to the MES over OPC-UA and pass defect locations to the MAGICIAN Cleaning Robot for rework, explaining every decision to operators. Tested so far in a full simulation of the cell, WIZARD will next be demonstrated at TRL 7 on a production line in the project’s testbed in Malta.

More information

 

 

 

 

 

 

 

The companies

Established in 2004 in Piraeus, Greece, TROIA SHIPPING LTD specializes in critical mechanical cold repairs, precision metal stitching, carbon fiber structural reinforcements, and composite pipeline rehabilitation under extreme operating conditions. Holding an active NATO NCAGE code (G2254) and ISO certifications, TROIA delivers permanent structural restoration and leak-sealing solutions in hazardous environments without hot works. Within MAGICIAN, TROIA serves as an end-user and AUC partner, driving shipyard feasibility and operational validation.

More information

DELTA-MPIS is a Greek engineering and applied research SME based at Lefkippos Technology Park, NCSR “Demokritos”. Its expertise spans advanced materials, particularly carbon-based composites and hybrid nanomaterials, multiphysics simulation, finite element analysis and digital innovation. Combining customised design, advanced prototyping and machine learning, the company develops solutions for digital twins, structural health monitoring, predictive maintenance and manufacturing process optimisation. Through industrial collaborations and European research projects, DELTA-MPIS supports improved performance, safety and production efficiency, with an emphasis on sustainability and circularity.

More information

 

Their project HULLMAP

HULLMAP introduces automated, traceable robotic workflows to composite maritime maintenance. The project deploys sensor-equipped robotics to detect and map composite hull defects directly into CAD, enabling FE-driven patch design and force-compliant surface preparation prior to bonding. By bridging robotics with marine engineering, HULLMAP eliminates empirical repairs, maximizes structural durability, and significantly reduces vessel downtime and hazardous shipyard exposure.